Goods: NTC A/B ONE/TWO Step Horizontal Impregnation Lines
1) Usage:
Two step impregnation drier lines main used to impregnated, gluing, dry and stack with melamine resin, urea resin and Phenolic resin. It is suitable for HPL paper and melamine paper.
2) Scope:
This lines is suitable for impregnated paper that weight is 30-220g/m2 and width is 900-1350mm. The moisture strength of raw paper is not less than 0.75kgf/15m.
3) Enviroment:
3.1 Suitable for none erosion and water-soluble resin(for example urea resin, melamine resin, phenolic resin and candy glue etc.)
3.2 Heat resistance grade: F grade
3.3 environment temperature: 10~40ºC.
3.4 relative moisture≤90%(20ºC)
3.5 Elevation is not less than 1000m.
4)General Parameter
Type No. |
TOCC1500B |
TOCC1800B |
TOCC2100B |
TOCC2400B |
TOCC2700B |
Paper width |
900~1300 |
900~1600 |
900~1900 |
900~2200 |
900~2500 |
Working width |
1500mm |
1800mm |
2100mm |
2400mm |
2700mm |
Mechanical speed |
0~80m/min |
Working speed |
35+-5m/min |
Working height |
1250mm |
Heating medium |
Thermal oil/hot air |
Max. temperature of thermal oil |
250ºC |
working temperature of drier room |
120~180ºC |
5)Main Measurement
Working width |
1500mm |
1800mm |
2100mm |
2400mm |
2700mm |
Roll width |
1500mm |
1800mm |
2100mm |
2400mm |
2700mm |
max. width of paper |
1300mm |
1600mm |
1900mm |
2200mm |
2500mm |
max. diameter of paper core |
φ1100mm |
max. weight of paper roll |
1200kg |
inner diameter of paper roll core shaft |
3''(76mm) |
length of every drier unit |
3750mm |
valid drying length |
(2+4)×3750=22500mm or (3+5)×3750=30000mm |
valid drying width |
1400mm |
1700mm |
2000mm |
2300mm |
2600mm |
total length of production lines |
~48000mm ~56000mm |
max. width of production lines |
~3000mm |
~3300mm |
~3600mm |
~3900mm |
~4200mm |
max. height of production lines |
4500mm |
operation location |
left or right side of lines, along the direction of paper running |
driving location |
right or left side of lines, along the direction of paper running |
6)Drive/power parameter
driving power |
3-phase,380V,50Hz(or as requested) |
control power |
2 phase,220V,50Hz(or as requested) |
total power |
~70kw |
~85kw |
~85kw |
~95kw |
~85kw |
Heating medium |
thermal oil(inlet temperature is over 220ºC) /hot air |
Total heat consumption |
~600000Kcal |
~650000kcal |
~700000kcal |
~750000kcal |
~800000kcal |
pressure of compressed air |
0.5~0.7Mpa |
consumption of compressed air |
~8m3 |
consumption of cooling water |
12m3 |
supplying pressure of cooling water |
0.2~0.4Mpa |
7) Layout of the impregnation Lines
8) The pictures of some project: