1200X1800X17mm As6669 Australia Standard F17 Structrual Formply Concrete Construction Plywood

Product Description

Product Description

Construction:	Panel code: 17-13-11 17 mm nominal thickness 1.3 mm face veneer 11 plies
Film:	60/ 165 g/m2 black phenolic resin coating, 2 sides
Glue bond:	Phenolic resin. A-bond.
Edge seal:	Edges are sealed with 2 layer acrylic paint
Stress Grade:	F17, Applies in both the parallel and perpendicular directions to the grain.
Standard:	AS 6669 - 2007 Plywood - Formwork
Finish:	Capable of a Class 2 off-form finish on first pour when used in conjunction with good site and formwork practices and AS 3610 (subject to conditions).
Formaldehyde Emission:	Super E0
Environmental:	FSC Certified/ BSI BENCHMARK
Tolerances:	Thickness: +/- 0.5 mm Squareness: +/- 1.0 mm

 

Detailed Photos

 

Product Parameters

Stress Grade	Nominal Thickness (mm)	Dimension (mm)	Weight (kg/sheet)	Packing Unit (sheets)
F17	17	1800 x 1200	23	40
F17	17	2400 x 1200	31	50

Our Advantages

HongCheng Formply is a high quality film faced plywood developed and engineered specifically for the Australian market. The product has been certificated by BSI Benchmark. With a three tier quality control program comprising; a detailed 'Manufacturing Specification' adhered to by trained staff; more than ten years experience quaily control teams; and regular, detailed and recorded in laboratory testing on key quality requirements. HongCheng Formply provides assurance of quality and consistency. All veneer in the manufacture is certified Forest Stewardship Council FSC ™(FSC-C145384) from sustainable forests.

Certifications

 

Packaging & Shipping

Packaging:
Inner with waterproof plastic bag, outside with plywood or carton, then fastened with steel packing strap and packed with pallets

Shipping:

Specialist Transportation Service Team

We could control the production to delivery on time.

After Sales Service

How to cut the the best from HongCheng film faced plywood?

Storage
Always clean and repair the formwork panels before storage, the formwork should then be stacked off the ground on level supports and under cover. framed formwork panels should be stacked alternately face and back to back to avoid face damage by bolts etc. if panels are wet, do not allow them to dry too rapidly.

Sealing of edges
Phenolic film faced plywood edges are fully sealed by the factory and it is the most important that all edges remain sealed. to obtain full value from a phenolic film faced plywood sheet any recut edges should sealed as soon as possible with water proof paint sealing of holes.
any hole made in film faced formwork panels should also be sealed to prevent water entering. if water does enter it may cause swelling around the holes.

Cleaning and repair
To obtain full life, cleaning should be carried out immediately after each use. phenolic film faced plywood may be wiped with release agent or cleaned with water and stiffbrush. it may be necessary to use a hard wood scraper but care should be taken not to damage the plywood face. do no use a wire brush or sharp metal scraper to dislodge hardened concrete.

FAQ

Q: What service could you supply?

A: In addition to providing high quality standardized products, we can also provide special-sized products and customized services. More important, you could get the professional suggestion from our expert.

Q: Could I get some free samples?
A: We could send you the free samples via your express account. Or you could also prepay the postage to us. After the order confirmed, the express fee will be paid back.

Q: How about your payment terms?
A: We accept both T/T payment and irrevocable L/C at sight. For the T/T payment, we accept 30% prepayment in advance and the balance payable against copy of B/L.

Q: What is your delivery lead time?
Generally, we can deliver the goods to you within 7~30 days according to the purchase quantity after receiving your 30% prepayment or original B/L.